Solutions galvaniques pour la bijouterie
Nos Clients accordent aux solutions galvaniques LEGOR certaines caractéristiques de valeur qui sont utiles pour faciliter le travail quotidien : un excellent rendu, la facilité d’utilisation et la garantie de contrôle du processus.
Les solutions galvaniques LEGOR résultent d’un processus de production très minutieux, à partir de la sélection rigoureuse des matières premières meilleures. La transformation commence lorsque les matières premières font l’objet d’un ensemble de protocoles opérationnels très stricts, suivis d’intenses contrôles de qualité et, enfin, termine par l’emballage.
Avec une attention particulière aux pratiques de production et aux détails, la certification ISO 9001 garantit une approche professionnelle et la haute qualité de nos produits.
Tout en répondant aux exigences de la mode et orientant dans cette direction l’activité de notre laboratoire de recherche et de développement, nous sommes en mesure d’offrir une vaste gamme de solutions galvaniques pour répondre aux exigences des producteurs de tous les pays.
3019000
MATTE EFFECT
- Transform polished surfaces into matte surfaces
- Transparent nano-ceramic cataphoretic paint
- Obtainable thicknesses from 5 to 30 micron
- Resistance to abrasion and corrosion
3019002
Solvent for Ceramix 1 L
962462
Ultrasonic degreasing solution 5 L
Low-alkaline liquid cleanser for ultrasound washings with high dissolving power for polishing pastes, oil and grease. Specific for gold and silver, bu ... (read more)
Low-alkaline liquid cleanser for ultrasound washings with high dissolving power for polishing pastes, oil and grease. Specific for gold and silver, but suitable also for copper, brass and steel. (Read less)
Family: AGLITE-ECO
AG-ECO1
ECO SILVER – Cyanide free silver plating solution 1L (ready-to-use)
ECO-Silver is a silver plating electrolyte for bath plating which provides for a new and completely cyanide-free approach to silver electroplating . ... (read more)
ECO-Silver is a silver plating electrolyte for bath plating which provides for a new and completely cyanide-free approach to silver electroplating . When comparing to traditional silver plating methods which can contain up to 200 grams of potassium cyanide per liter, this plating solution provides a perfect resolution to common cyanide restrictions immerging from place to place throughout in the international community. Moreover the complete absence of cyanide provides for healthier working conditions for plating operators as well as reduces environmental concerns in the form of waste water and waste water treatment.
ECO-Silver is a two part process commercially available in a kit. Part A being the silver solution and Part B being the post treatment. The solution works at low current densities and can obtain a plating thickness up to 20 micron. The final deposit is bright, 99.9% pure silver, and does not have to be polished after deposition. This silver plating solution can be used in both decorative and technical plating applications.
(Read less)CERAMIX
TransparentCeramic-basedFor protection
- High resistance to abrasion
- Absence of “orange peel” effect on plain and extensive surfaces
- Invisible deposits extremely brilliant and uniform
- Excellent resistance to corrosion tests
- Compliant with REACH & OSHA regulation
Ceramix is a second generation, transparent nano-ceramic e-coating specifically designed for industrial scale productions. It is a hybrid resin impreg ... (read more)
Ceramix is a second generation, transparent nano-ceramic e-coating specifically designed for industrial scale productions. It is a hybrid resin impregnated with ceramic improving resistance to abrasion as well as other international normative testing procedures. The incorporation of the ceramic particles also provide a metallic sensation to the touch. Achievable thickness ranges of the coating layer cover from 5-35 micron while remaining completely transparent and undetectable. The resin matrix has been specifically studied to remove the “orange peel” phenomenon common when coating large flat surfaces. In production CERAMIX e- coating is extremely stable, more resistant to chemical contamination and does not underperform when impure or conductive water greater than 5 microsiemens is introduced to the bath. (Read less)
Family: FLASHGOLD
GF145N
Red Russian Gold flash solution for bath plating 0.5 g/l (ready-to-use)
GF145N is a ready-to-use gold plating bath that confers to the surfaces worked with the typical C145N alloy red color which is very appreciated in the ... (read more)
GF145N is a ready-to-use gold plating bath that confers to the surfaces worked with the typical C145N alloy red color which is very appreciated in the russian market. (Read less)
Family: FLASHGOLD
GF1N
1N yellow gold flash solution for bath plating 0.8 g/l (ready-to-use)
GF1N is a gold electrolyte intended for bath plating, which deposits a uniform, shiny layer in a 1N color. 1N can be described as a greenish yellow ... (read more)
GF1N is a gold electrolyte intended for bath plating, which deposits a uniform, shiny layer in a 1N color. 1N can be described as a greenish yellow color with evidently green undertones and is a common color throughout Europe. GF1N is intended for decorative use therefore has been designed for flash plating permitting a deposition thickness of up to 0.2 micron. This yellow gold plating solution is Nickel, Lead, and Cadmium free, and despite being a traditional cyanide based alkaline bath, it is easily transported given the toxic level contained is below the limit established by international transportation laws. (Read less)
Family: FLASHGOLD
GF24
24 kt yellow gold flash solution for bath plating 0.8 g/l (ready-to-use)
GF24 is a gold electrolyte intended for bath plating, which deposits a uniform, shiny layer in a 24 kt color. The color is that of pure gold as no o ... (read more)
GF24 is a gold electrolyte intended for bath plating, which deposits a uniform, shiny layer in a 24 kt color. The color is that of pure gold as no other metals are used as an alloy in the deposit. GF24 is intended for decorative use therefore has been designed for flash plating permitting a deposition thickness of up to 0.2 micron. This yellow gold plating solution is Nickel, Lead, and Cadmium free, and despite being a traditional cyanide based alkaline bath, it is easily transported given the toxic level contained is below the limit established by international transportation laws. (Read less)
Family: FLASHGOLD
GF2N
2N yellow gold flash solution for bath plating 0.8 g/l (ready-to-use)
GF2N is a gold electrolyte intended for bath plating, which deposits a uniform, shiny layer in a 2N color. 2N can be described as a pale yellow with ... (read more)
GF2N is a gold electrolyte intended for bath plating, which deposits a uniform, shiny layer in a 2N color. 2N can be described as a pale yellow with green undertones and considered to match 18 kt yellow gold plating in most international markets. GF2N is intended for decorative use therefore has been designed for flash plating permitting a deposition thickness of up to 0.2 microns. This yellow gold plating solution is Nickel, Lead, and Cadmium free, and despite being a traditional cyanide based alkaline bath, it is easily transported given the toxic level contained is below the limit established by international transportation laws. (Read less)
Family: FLASHGOLD
GF3N
3N yellow gold flash solution for bath plating 0.8 g/l (ready-to-use)
GF3N is a gold electrolyte intended for bath plating, which deposits a uniform, shiny layer in a 3N color. 3N can be described as a rich yellow with ... (read more)
GF3N is a gold electrolyte intended for bath plating, which deposits a uniform, shiny layer in a 3N color. 3N can be described as a rich yellow with green undertones and considered to match 14 kt yellow gold plating in most international markets. GF3N is intended for decorative use therefore has been designed for flash plating permitting a deposition thickness of up to 0.2 micron. This yellow gold plating solution is Nickel, Lead, and Cadmium free, and despite being a traditional cyanide based alkaline bath, it is easily transported given the toxic level contained is below the limit established by international transportation laws. (Read less)
Family: FLASHGOLD
GF4N
4N yellow gold flash solution for bath plating 0.8 g/l (ready-to-use)
GF4N is a gold electrolyte intended for bath plating, which deposits a uniform, shiny layer in a 4N color. 4N can be described as a salmon yellow wi ... (read more)
GF4N is a gold electrolyte intended for bath plating, which deposits a uniform, shiny layer in a 4N color. 4N can be described as a salmon yellow with warm undertones and is a common color throughout South East Asia. GF4N is intended for decorative use therefore has been designed for flash plating permitting a deposition thickness of up to 0.2 micron. This yellow gold plating solution is Nickel, Lead, and Cadmium free, and despite being a traditional cyanide based alkaline bath, it is easily transported given the toxic level contained is below the limit established by international transportation laws. (Read less)
Family: FLASHGOLD
GF5N
5N yellow gold flash solution for bath plating 0.8 g/l (ready-to-use)
GF5N is a gold electrolyte intended for bath plating, which deposits a uniform, shiny layer in a 5N color. 5N can be described as a reddish yellow w ... (read more)
GF5N is a gold electrolyte intended for bath plating, which deposits a uniform, shiny layer in a 5N color. 5N can be described as a reddish yellow with warm brown undertones. GF5N is intended for decorative use therefore has been designed for flash plating permitting a deposition thickness of up to 0.2 micron. This yellow gold plating solution is Nickel, Lead, and Cadmium free, and despite being a traditional cyanide based alkaline bath, it is easily transported given the toxic level contained is below the limit established by international transportation laws. (Read less)
Family: FLASHGOLD
GFBROWN-K
Brown gold flash solution for bath plating (ready-to-use)
Brown gold or otherwise known as Chocolate Gold is now obtainable through a plating deposition. GFBROWN-K gives jewelers and electroplating operators ... (read more)
Brown gold or otherwise known as Chocolate Gold is now obtainable through a plating deposition. GFBROWN-K gives jewelers and electroplating operators everywhere an alternative gold color option away from the standard yellow and red tones that are available today, granting more design options. Chocolate Gold is also an excellent way to highlight brown stones in a setting, bringing out the stones color with less contrast and giving more emphasis to the highlight color. GFBROWN-K is intended for decorative use therefore has been designed for flash plating permitting a deposition thickness of up to 0.2 micron. This brown gold plating solution is Nickel, Lead, and Cadmium free. (Read less)
Family: FLASHGOLD
GFGREEN
Ready to use green gold flash plating solution without cadmium 1g/l
- Green gold color
- Good tarnishing resistance
- Thickness up to 0,2 µm
- Good color reproducibility and stability
- Without Cadmium
- Without free cyanide
GFGREEN is a ready-to-use plating solution able to deposit shiny layers uniform and of green color without Cadmium in its formula. The color given by ... (read more)
GFGREEN is a ready-to-use plating solution able to deposit shiny layers uniform and of green color without Cadmium in its formula. The color given by GFGREEN permits to the goldsmiths and jewelry producers to get an alternative in color with respect to the common yellow shades or pink nowadays available on the Market.
GFGREEN is FOR FLASH DECORATIVE APPLICATION ONLY being able to deposit thicknesses not higher than 0.2 microns.
Moreover it is important to highlight that this solution is completely WITHOUT CADMIUM, Nickel, Lead being REACH compliant. (Read less)
GFGREEN is FOR FLASH DECORATIVE APPLICATION ONLY being able to deposit thicknesses not higher than 0.2 microns.
Moreover it is important to highlight that this solution is completely WITHOUT CADMIUM, Nickel, Lead being REACH compliant. (Read less)
Family: FLASHGOLD
GFHAMILTON
Hamilton yellow gold flash solution for bath plating 0.6 g/l (ready-to-use)
GFHAMILTON is a gold electrolyte intended for bath plating, which deposits a uniform, shiny layer in a Hamilton color. Hamilton can be described as ... (read more)
GFHAMILTON is a gold electrolyte intended for bath plating, which deposits a uniform, shiny layer in a Hamilton color. Hamilton can be described as a pale yellow with green undertones and considered to match 18 KT yellow gold plating in most international markets. GFHAMILTON is intended for decorative use therefore has been designed for flash plating permitting a deposition thickness of up to 0.2 microns. This yellow gold plating solution is Nickel, Lead, and Cadmium free, and despite being a traditional cyanide based alkaline bath, it is easily transported given the toxic level contained is below the limit established by international transportation laws. (Read less)
Family: FLASHGOLD
GFPINK
Pink gold flash solution for bath plating 0.6 g/l (ready-to-use)
GFPINK is Legor Groups latest installment of red gold solutions developed to meet the plating industries mature keen eye for color. A light pink color ... (read more)
GFPINK is Legor Groups latest installment of red gold solutions developed to meet the plating industries mature keen eye for color. A light pink color with true white undertones, presenting a distinctive pink finish. Given that the final layer is 20KT gold in title, the layer is also more tarnish resistant when compared to the common 18KT gold titled solutions found on the market. (Read less)
Family: FLASHGOLD
GFRED
Red gold flash solution for bath plating 0.8 g/l (ready-to-use)
GFRED is a gold electrolyte intended for bath plating, which deposits a uniform, shiny layer in a red gold. The deposit can be described as a deep re ... (read more)
GFRED is a gold electrolyte intended for bath plating, which deposits a uniform, shiny layer in a red gold. The deposit can be described as a deep red color close to that of copper. GFRED is intended for decorative use therefore has been designed for flash plating permitting a deposition thickness of up to 0.2 micron. This red gold plating solution is Nickel, Lead, and Cadmium free, and despite being a traditional cyanide based alkaline bath, it is easily transported given the toxic level contained is below the limit established by international transportation laws. (Read less)
Family: FLASHGOLD
GFRED-ECO
Red gold solution for bath plating 1 g/l (ready-to-use)
GFRED-ECO is a mild alkaline flash gold plating electrolyte that deposits a uniform, bright layer in red gold. The final color produced can be conside ... (read more)
GFRED-ECO is a mild alkaline flash gold plating electrolyte that deposits a uniform, bright layer in red gold. The final color produced can be considered a high end fashion red gold color while corresponding to the normalized NIHS standard 6N gold. Though the solution is a mild alkaline formula, it functions without the help of potassium cyanide, therefore there are no free cyanides in the solution. This makes for a safer and non-toxic approach to electroplating. The alloy deposited is more complex than standard red gold plating solutions making GFRED-ECO more resistant to tarnish or oxidization. This red gold plating solution is intended for decorative use as the maximum thickness obtainable is 0.2 micron. (Read less)
Family: STRIKEGOLD
GFX1
Acid gold strike solution for bath plating 1 g/l (ready-to-use)
GFX1 is a strongly acidic gold strike plating solution designed for technical applications. The acidic nature of the electrolyte allows it to deposit ... (read more)
GFX1 is a strongly acidic gold strike plating solution designed for technical applications. The acidic nature of the electrolyte allows it to deposit onto substrates that traditionally create adhesion problems such as bronze substrates. It can also be used as a pretreatment to activate some stainless steel alloys by breaking down the natural oxide layer due to the aggressive chemical make-up. The use of this gold strike plating solution requires subsequent steps to bring a substrate to an acceptable finish. (Read less)
GP03P
Pink gold pen plating solution
GP03P is a pink gold pen plating solution which deposits a brilliant pink color to the surface applied. It is a perfect solution to for two-tone plati ... (read more)
GP03P is a pink gold pen plating solution which deposits a brilliant pink color to the surface applied. It is a perfect solution to for two-tone plating applications where a pink color is required. It can also be used to highlight specific details or cover solder joints on pink gold items. This pink gold pen plating solution is nickel, lead, and cadmium free, and despite being a traditional cyanide based alkaline chemical, it is easily transported given the toxic level contained is below the limit established by international transportation laws. (Read less)
GP1-1N
1N yellow gold pen plating solution
GP1-1N is a yellow gold pen plating solution which deposits a brilliant 1N gold color to the surface applied. 1N can be described as a greenish yellow ... (read more)
GP1-1N is a yellow gold pen plating solution which deposits a brilliant 1N gold color to the surface applied. 1N can be described as a greenish yellow color with evidently green undertones and is a common color throughout Europe. It is a perfect solution to for two-tone plating applications where a greenish gold color is required. It can also be used to highlight specific details or cover solder joints on 1N gold colored items. This yellow gold pen plating solution is nickel, lead, and cadmium free, and despite being a traditional cyanide based alkaline chemical, it is easily transported given the toxic level contained is below the limit established by international transportation laws. (Read less)
GP1-2N
2N yellow gold pen plating solution
GP1-2N is a yellow gold pen plating solution which deposits a brilliant 2N gold color to the surface applied. 2N can be described as a pale yellow wit ... (read more)
GP1-2N is a yellow gold pen plating solution which deposits a brilliant 2N gold color to the surface applied. 2N can be described as a pale yellow with green undertones and considered to match 18 kt yellow gold plating in most international markets. It is a perfect solution to for two-tone plating applications where a pale gold color is required. It can also be used to highlight specific details or cover solder joints on 2N gold colored or 18 kt gold items. This yellow gold pen plating solution is nickel, lead, and cadmium free, and despite being a traditional cyanide based alkaline chemical, it is easily transported given the toxic level contained is below the limit established by international transportation laws. (Read less)
GP1-3N
3N yellow gold pen plating solution
GP1-3N is a yellow gold pen plating solution which deposits a brilliant 3N gold color to the surface applied. 3N can be described as a rich yellow wit ... (read more)
GP1-3N is a yellow gold pen plating solution which deposits a brilliant 3N gold color to the surface applied. 3N can be described as a rich yellow with green undertones and considered to match 14 kt yellow gold plating in most international markets. It is a perfect solution to for two-tone plating applications where a rich gold color is required. It can also be used to highlight specific details or cover solder joints on 3N gold colored or 14 kt gold items. This yellow gold pen plating solution is nickel, lead, and cadmium free, and despite being a traditional cyanide based alkaline chemical, it is easily transported given the toxic level contained is below the limit established by international transportation laws. (Read less)
Family: STRONGOLD
GT4A
24 kt yellow gold micron solution for bath plating 4 g/l (ready-to-use)
GT4A is a mildly acidic gold plating electrolyte that deposits a color which is near that of pure 24 kt gold. The additional metal which is co-deposit ... (read more)
GT4A is a mildly acidic gold plating electrolyte that deposits a color which is near that of pure 24 kt gold. The additional metal which is co-deposited with the gold as an alloy allow for an achievable thickness of 3 micron in a layer which remains 99.7% gold by weight. The wider range of obtainable thicknesses combined with the ability to solder the plating deposit, allow for this electrolyte to be used in both technical and decorative applications. (Read less)
Family: STRONGOLD
GT4A1N
1N-14 yellow gold micron solution for bath plating 4 g/l (ready-to-use)
GT4A1N is a mildly acidic gold plating electrolyte that deposits a color which precisly corrosponds to the normalized NIHS standard 1N-14 gold. 1N-14 ... (read more)
GT4A1N is a mildly acidic gold plating electrolyte that deposits a color which precisly corrosponds to the normalized NIHS standard 1N-14 gold. 1N-14 can be described as a pale yellow color in 14 kt and it is common to country’s such as Germany, France, and Switzerland. The popularity of the color throughout Europe has made 1N-14 the color of choice for the majority of European fashion houses. The additional metals which are co-deposited with the gold as an alloy allow for an achievable thickness of 3 micron in a deposit which remains 99.7% gold by weight. The wider range of obtainable thicknesses combined with the ability to solder the plating deposit, allow for this electrolyte to be used in both technical and decorative applications. (Read less)
Family: STRONGOLD
GT4A2N
2N yellow gold micron solution for bath plating 4 g/l (ready-to-use)
GT4A2N is a mildly acidic gold plating electrolyte that deposits a color which precisely corresponds to the normalized NIHS standard 2N-18 gold. 2N-18 ... (read more)
GT4A2N is a mildly acidic gold plating electrolyte that deposits a color which precisely corresponds to the normalized NIHS standard 2N-18 gold. 2N-18 can be described as a pale yellow color in 18 kt. The additional metals which are co-deposited with the gold as an alloy allow for an achievable thickness of 3 micron in a deposit which remains 99.7% gold by weight. The wider range of obtainable thicknesses combined with the ability to solder the plating deposit, allow for this electrolyte to be used in both technical and decorative applications. (Read less)
Family: STRONGOLD
GT4A3N
3N yellow gold micron solution for bath plating 4 g/l (ready-to-use)
GT4A3N is a mildly acidic gold plating electrolyte that deposits a color which precisely corresponds to the normalized NIHS standard 3N gold. 3N can b ... (read more)
GT4A3N is a mildly acidic gold plating electrolyte that deposits a color which precisely corresponds to the normalized NIHS standard 3N gold. 3N can be described as a rich yellow color in 14 kt. This plating bath substitutes the common gold plating alloy nickel, with iron to produce a coating which is 100% hypoallergenic. The additional metals which are co-deposited with the gold as an alloy allow for an achievable thickness of 3 micron in a deposit which remains 99.7% gold by weight. The wider range of obtainable thicknesses combined with the ability to solder the plating deposit, allow for this electrolyte to be used in both technical and decorative applications. (Read less)
Family: STRONGOLD
GT4PINK
GoldenRose 18 kt pink gold micron solution for bath plating 4 g/l (ready-to-use)
GoldenRoseTM is the first 18 kt pink thickness electrolyte available on the market in an acidic process. This system is particularly indicated for de ... (read more)
GoldenRoseTM is the first 18 kt pink thickness electrolyte available on the market in an acidic process. This system is particularly indicated for decorative applications which require hard gold or thickness plating in a pink shade while reaching thickness up to 5 micron. The gold is co-deposited with copper to generate an alloy which is 75% (18 kt) gold by title granting a significant cost savings. With a 400 HV hardness the layer is durable and tightly nit at the microstructure.
The majority of Gold/Copper systems available on the market operate on a chemical principle which requires a constant balance of the copper/cyanide ratio in order to maintain the alloy and color of the electrolyte. This requires routine maintenance and adds significant management costs to the system use. Our system is acidic, simplifying the maintenance to that of other acid gold electrolytes, making it the easiest system of its kind to manage on the market today.
(Read less)Family: STRONGOLD
GTBROWN
Ready-to-use thick plating bath 1,5 g/l brown gold color
GTBROWN is an acidic gold micron thick plating solution giving a brown gold deposition, particularly suitable for decorative application in the watch ... (read more)
GTBROWN is an acidic gold micron thick plating solution giving a brown gold deposition, particularly suitable for decorative application in the watch industry as well as in the costume jewelry or in any other sector which requires a a particular gold coverage with high resistance to the abrasion and corrosion. (Read less)
GY2P
24 kt yellow gold pen plating solution
GY2P is a yellow gold pen plating solution which deposits a brilliant 24 kt gold color to the surface applied. The color is that of pure gold as no ot ... (read more)
GY2P is a yellow gold pen plating solution which deposits a brilliant 24 kt gold color to the surface applied. The color is that of pure gold as no other metals are used as an alloy in the deposit. It is a perfect solution to for two-tone plating applications where a rich gold color is required. It can also be used to highlight specific details or cover solder joints on 24 kt gold items. This yellow gold pen plating solution is nickel, lead, and cadmium free, and despite being a traditional cyanide based alkaline chemical, it is easily transported given the toxic level contained is below the limit established by international transportation laws. (Read less)
KLIAR-24-1
24 kt gold colored nano-ceramic e-coating
KLIAR-24 is a bright 24 kt gold colored e-coating intended for decorative finishing purposes. The e-coating is infused with nano-ceramic particles whi ... (read more)
KLIAR-24 is a bright 24 kt gold colored e-coating intended for decorative finishing purposes. The e-coating is infused with nano-ceramic particles which are undetectable by the human eye. These particles make the coating more abrasion resistant than traditional coatings as well as providing a metallic sensation to the touch. The flexible curing range allows for the treatment of the majority of metallic substrates to include zamak. The achievable thickness ranges from 5-18 micron. KLIAR nano-ceramic coatings also allow for major improvements in resistance to both UV light and corrosion passing the most used standardized normative testing. (Read less)
KLIAR-BLK1
Black colored nano-ceramic e-coating (1 L)
KLIAR-BLK1 is a black colored e-coating intended for decorative finishing purposes. The e-coating is infused with nano-ceramic particles which are und ... (read more)
KLIAR-BLK1 is a black colored e-coating intended for decorative finishing purposes. The e-coating is infused with nano-ceramic particles which are undetectable by the human eye. These particles make the coating more abrasion resistant than traditional coatings as well as providing a metallic sensation to the touch. The flexible curing range allows for the treatment of the majority of metallic substrates to include zamak. The achievable thickness ranges from 5-18 micron. KLIAR nano-ceramic coatings also allow for major improvements in resistance to both UV light and corrosion passing the most used standardized normative testing. (Read less)
KLIAR-BLU1
Blue colored nano-ceramic e-coating (1 L)
KLIAR-BLU1 is a bright blue colored e-coating intended for decorative finishing purposes. The e-coating is infused with nano-ceramic particles which a ... (read more)
KLIAR-BLU1 is a bright blue colored e-coating intended for decorative finishing purposes. The e-coating is infused with nano-ceramic particles which are undetectable by the human eye. These particles make the coating more abrasion resistant than traditional coatings as well as providing a metallic sensation to the touch. The flexible curing range allows for the treatment of the majority of metallic substrates to include zamak. The achievable thickness ranges from 5-18 micron. KLIAR nano-ceramic coatings also allow for major improvements in resistance to both UV light and corrosion passing the most used standardized normative testing. (Read less)
KLIAR-BRW1
Brown colored nano-ceramic e-coating (1 L)
KLIAR-BRW1 is a bright brown colored e-coating intended for decorative finishing purposes. The e-coating is infused with nano-ceramic particles which ... (read more)
KLIAR-BRW1 is a bright brown colored e-coating intended for decorative finishing purposes. The e-coating is infused with nano-ceramic particles which are undetectable by the human eye. These particles make the coating more abrasion resistant than traditional coatings as well as providing a metallic sensation to the touch. The flexible curing range allows for the treatment of the majority of metallic substrates to include zamak. The achievable thickness ranges from 5-18 micron. KLIAR nano-ceramic coatings also allow for major improvements in resistance to both UV light and corrosion passing the most used standardized normative testing. (Read less)
KLIAR-BX1
Jet Black opaque E-coating (1 L)
KLIAR-BX is a jet black e-coating for electrophoretic deposition. This polyurethane based paint deposits a layer which is opaque and is able to hide ... (read more)
KLIAR-BX is a jet black e-coating for electrophoretic deposition. This polyurethane based paint deposits a layer which is opaque and is able to hide any substrate surface defects. The achievable thickness range is 5-25 micron. The final coating can be considered a medium gloss and can be used either a base coat primer, prior to a top coat, or as a final surface finish due to the visually appealing dark black color. The paint has a very high resistance to corrosion and UV light, while maintains a medium resistance to abrasion. (Read less)
KLIAR-CB1
Transparent nano-ceramic e-coating (1 L)
KLIAR-CB is the original nano-ceramic e-coating intended for technical finishing purposes. The e-coating is infused with nano-ceramic particles which ... (read more)
KLIAR-CB is the original nano-ceramic e-coating intended for technical finishing purposes. The e-coating is infused with nano-ceramic particles which are undetectable by the human eye. These particles make the coating more abrasion resistant than traditional coatings as well as providing a metallic sensation to the touch. The flexible curing range allows for the treatment of the majority of metallic substrates to include zamak. The achievable thickness ranges from 5-18 micron. KLIAR nano-ceramic coatings also allow for major improvements in resistance to both UV light and corrosion passing the most used standardized normative testing. (Read less)
KLIAR-FCH1
Fuchsia colored nano-ceramic e-coating (1 L)
KLIAR-FCH1 is a bright fuchsia colored e-coating intended for decorative finishing purposes. The e-coating is infused with nano-ceramic particles whic ... (read more)
KLIAR-FCH1 is a bright fuchsia colored e-coating intended for decorative finishing purposes. The e-coating is infused with nano-ceramic particles which are undetectable by the human eye. These particles make the coating more abrasion resistant than traditional coatings as well as providing a metallic sensation to the touch. The flexible curing range allows for the treatment of the majority of metallic substrates to include zamak. The achievable thickness ranges from 5-18 micron. KLIAR nano-ceramic coatings also allow for major improvements in resistance to both UV light and corrosion passing the most used standardized normative testing. (Read less)
KLIAR-GRN1
Green colored nano-ceramic e-coating (1 L)
KLIAR-GRN1 is a bright green colored e-coating intended for decorative finishing purposes. The e-coating is infused with nano-ceramic particles which ... (read more)
KLIAR-GRN1 is a bright green colored e-coating intended for decorative finishing purposes. The e-coating is infused with nano-ceramic particles which are undetectable by the human eye. These particles make the coating more abrasion resistant than traditional coatings as well as providing a metallic sensation to the touch. The flexible curing range allows for the treatment of the majority of metallic substrates to include zamak. The achievable thickness ranges from 5-18 micron. KLIAR nano-ceramic coatings also allow for major improvements in resistance to both UV light and corrosion passing the most used standardized normative testing. (Read less)
KLIAR-PNK1
Pink colored nano-ceramic e-coating (1 L)
KLIAR-PNK1 is a bright pink colored e-coating intended for decorative finishing purposes. The e-coating is infused with nano-ceramic particles which a ... (read more)
KLIAR-PNK1 is a bright pink colored e-coating intended for decorative finishing purposes. The e-coating is infused with nano-ceramic particles which are undetectable by the human eye. These particles make the coating more abrasion resistant than traditional coatings as well as providing a metallic sensation to the touch. The flexible curing range allows for the treatment of the majority of metallic substrates to include zamak. The achievable thickness ranges from 5-18 micron. KLIAR nano-ceramic coatings also allow for major improvements in resistance to both UV light and corrosion passing the most used standardized normative testing. (Read less)
KLIAR-RED1
Red colored nano-ceramic e-coating (1 L)
KLIAR-RED1 is a bright red colored e-coating intended for decorative finishing purposes. The e-coating is infused with nano-ceramic particles which ar ... (read more)
KLIAR-RED1 is a bright red colored e-coating intended for decorative finishing purposes. The e-coating is infused with nano-ceramic particles which are undetectable by the human eye. These particles make the coating more abrasion resistant than traditional coatings as well as providing a metallic sensation to the touch. The flexible curing range allows for the treatment of the majority of metallic substrates to include zamak. The achievable thickness ranges from 5-18 micron. KLIAR nano-ceramic coatings also allow for major improvements in resistance to both UV light and corrosion passing the most used standardized normative testing. (Read less)
KLIAR-TRQ1
Turquoise colored nano-ceramic e-coating (1 L)
KLIAR-TRQ1 is a bright turquoise colored e-coating intended for decorative finishing purposes. The e-coating is infused with nano-ceramic particles wh ... (read more)
KLIAR-TRQ1 is a bright turquoise colored e-coating intended for decorative finishing purposes. The e-coating is infused with nano-ceramic particles which are undetectable by the human eye. These particles make the coating more abrasion resistant than traditional coatings as well as providing a metallic sensation to the touch. The flexible curing range allows for the treatment of the majority of metallic substrates to include zamak. The achievable thickness ranges from 5-18 micron. KLIAR nano-ceramic coatings also allow for major improvements in resistance to both UV light and corrosion passing the most used standardized normative testing. (Read less)
KLIAR-VLT1
Violet colored nano-ceramic e-coating (1 L)
KLIAR-VLT1 is a bright violet colored e-coating intended for decorative finishing purposes. The e-coating is infused with nano-ceramic particles which ... (read more)
KLIAR-VLT1 is a bright violet colored e-coating intended for decorative finishing purposes. The e-coating is infused with nano-ceramic particles which are undetectable by the human eye. These particles make the coating more abrasion resistant than traditional coatings as well as providing a metallic sensation to the touch. The flexible curing range allows for the treatment of the majority of metallic substrates to include zamak. The achievable thickness ranges from 5-18 micron. KLIAR nano-ceramic coatings also allow for major improvements in resistance to both UV light and corrosion passing the most used standardized normative testing. (Read less)
NEUT1
Neutralizing solution for the plating process 5L (ready-to-use)
Neutralizing solution in most cases is an acidic blend. Given that most surface preparation agents are heavy alkaline in nature, the acid acts as a ne ... (read more)
Neutralizing solution in most cases is an acidic blend. Given that most surface preparation agents are heavy alkaline in nature, the acid acts as a neutralizing agent and eliminates any residue of the cleaner that remains on the metallic substrate as drag-out.
The neutralization tank is a very important step. If the degreaser/electro-cleaner is introduced into the subsequent plating solutions via drag-in, the pH of the baths risk dramatic fluctuation due to cross contamination resulting in poor plating results or metal precipitation.
(Read less)NIVAL1
Pigmented white paste for cataphoretic lacquer 1kg
- White additive for e-coating
- Compatible with other pigments
- Compatible with other coating texture additives
A coating additive that can be added directly to compatible coating baths, transforming the coating from transaprent to opaque. When added to transpar ... (read more)
A coating additive that can be added directly to compatible coating baths, transforming the coating from transaprent to opaque. When added to transparent coating bath, the deposit is modified from transparent to a vivid glossy white color. NIVAL can be paired with other colored pigmantes, texture additives or a combination thereof to obtain an unlimited amount of colored effects. (Read less)
Family: PDSTARK-ST
PD2
Palladium solution for flash bath plating 2 g/l ready-to-use white color
PD2 is a traditional palladium plating electrolyte for bath plating. The chemical make-up of this ammonia based product deposits a consistent layer of ... (read more)
PD2 is a traditional palladium plating electrolyte for bath plating. The chemical make-up of this ammonia based product deposits a consistent layer of 99.9% pure palladium to the metal substrate which it is applied. PD2 is primarily used for flash plating as the maximum thickness achievable is 0.2 micron. The palladium deposit can be used as a barrier to prevent copper migration which is common to metal substrates containing significant amounts of this element. (Read less)
Family: PDSTARK
PD3-ECO
Palladium solution for flash bath plating 3 g/l ready-to-use white color
PD3-ECO is the most advanced formulation of palladium plating. This new generation palladium is totally absent of free ammonia granting extremely simp ... (read more)
PD3-ECO is the most advanced formulation of palladium plating. This new generation palladium is totally absent of free ammonia granting extremely simple production management and an eco-friendly production approach. In addition to reducing environmental impact, PD3-ECO makes the operator’s work healthier and easier as frequent pH management or regular additions of concentrated ammonia is not required. Moreover, since the pH of the bath is near neutral, hydrogenation of the deposit is limited compared to the traditional ammonia baths, this provides a white deposit almost like that of rhodium and is less porous than the traditional palladium baths (Read less)
PD4-FE
Palladium iron solution for bath plating 4 g/l ready-to-use bright white color
PD4-FE is a ready-to-use palladium iron alloy electrolyte. By using iron as an alternative to the common palladium alloys: Nickle and cobalt, the depo ... (read more)
PD4-FE is a ready-to-use palladium iron alloy electrolyte. By using iron as an alternative to the common palladium alloys: Nickle and cobalt, the deposit remains 100% hypoallergenic.The solution is ammonia free making it easy to operate over time and aside its decorative use, it also combines a protective layer against corrosion and copper migration as it is an air-tight layer free from internal tension within the micro-structure at every thickness. (Read less)
RH2B
Black rhodium for bath plating 2 g/l ready-to-use
RH2B is a ready-to-use black rhodium for bath plating. This black rhodium electrolyte has been designed specifically for decorative electroplating app ... (read more)
RH2B is a ready-to-use black rhodium for bath plating. This black rhodium electrolyte has been designed specifically for decorative electroplating applications by granting alternative color options for finishes. The final color produced can be considered black with yellow undertones which makes the black color appear deeper. This room temperature procedure makes it ideal for two-tone designs as high temperature plating processes typically destroy traditional plating masks. RH2B can be replenished and maintained by completely restoring the rhodium content and the color with an all inclusive replenisher. The formulation is 100% arsenic free both in the metal deposited and in the chemical itself and falls within REACH compliance. (Read less)
RH2BX
Extra black rhodium ready-to-use code (2 g/l)
- The darkest black rhodium color available in the market
- Ideal for two-tone designs
- Room temperature process
- Oxidation resistant layer
- Able to replenish and maintain in large tanks
- 100% Arsenic free
- REACH compliant
RH2BX is a ready-to-use extra black rhodium for bath plating. This
black rhodium electrolyte has been designed specifically for decorative
elect
... (read more)RH2BX is a ready-to-use extra black rhodium for bath plating. This
black rhodium electrolyte has been designed specifically for decorative
electroplating applications by granting alternative color options for
finishes. The final color produced can be considered black with blueish
undertones which makes the black color appear deeper. This solution
works at rather low temperature thus making it ideal for two-tone
designs as high temperature plating processes typically destroy
traditional plating masks. RH2BX can be replenished and maintained by
completely restoring the rhodium content and the color with an all
inclusive replenisher. The formulation is 100% arsenic free both in the
metal deposited and in the chemical itself and falls within REACH
complianc. ATTENTION: The solution may present dust in the bottom of the bottle, but this will absolutely not affect the quality of the product. In any case it is advisable to shake the bottle before using.
(Read less)RH2FJ
White rhodium for bath 2g/100ml
- Lowest consumption speed (3 mg/ampmin)
- Highly resistant to organic contamination
- Compact deposit
- Ideal for beaker plating
- Phosphate based chemistry
- Low deposit efficiency
White rhodium is used for several reasons and the best product to select can vary depending on production size, production demands, and types of subst ... (read more)
White rhodium is used for several reasons and the best product to select can vary depending on production size, production demands, and types of substrates treated. The L* coordinate typically reflects a particular rhodium’s degree of whiteness. The higher the L* value is, the whiter the color is typically perceived. Also, different production practices and treated substrates have an effect on this value: this is the primary reason why we have fine-tuned four different process types in our portfolio. (Read less)
RH2FM
White rhodium for bath plating 2 g/250 ml make-up
RH2FM is the concentrated version of the M type white rhodium plating electrolyte. To prepare the ready-to-use product, simply pour the 250 ml bottle ... (read more)
RH2FM is the concentrated version of the M type white rhodium plating electrolyte. To prepare the ready-to-use product, simply pour the 250 ml bottle into 750 ml of pure deionized water. The properties of the RH2FM rhodium deposit grant a higher degree of whiteness due to a more compact deposition when compared to standard rhodium solutions following the same process cycle. These results have been obtained by improving working conditions: the applicable voltage range has been widened, making the process parameters more flexible to guarantee optimal results. This new anti-burn technology eliminates the most common errors such as: surface calculation inaccuracy, prolonged immersion times, bath overheating and excessive voltage. It is also possible to obtain thicknesses of 1.0 Micron.
As a consequence of the more brilliant deposition, the average consumption of the rhodium suspended in the electrolyte inclines to be around 10% higher under the same working conditions.
(Read less)RH2FW
White rhodium for bath plating 2 g/100 ml make-up
RH2FW is the concentrated version of the W type white rhodium plating electrolyte. To prepare the ready-to-use product, simply pour the 100 ml bottle ... (read more)
RH2FW is the concentrated version of the W type white rhodium plating electrolyte. To prepare the ready-to-use product, simply pour the 100 ml bottle into 900 ml of pure deionized water. This white rhodium plating electrolyte is commonly used in larger rhodium installations due to the minimal components needed for maintenance. The deposition speed is slower than other formulations allowing for accurate consumption control. This balanced deposit also makes it an ideal choice for large or flat surfaces permitting complete surface coverage in low current density areas. RH2W is efficient at room temperature allowing minimal water evaporation. (Read less)
RH2FXL
Technical and decorative rhodium electrolyte
The excessive throwing power of this rhodium plating electrolyte allows for easy distribution in difficult to reach places making it ideal for substra ... (read more)
The excessive throwing power of this rhodium plating electrolyte allows for easy distribution in difficult to reach places making it ideal for substrates with a lot of detail. This formulation has been developed specifically for items with a lot of stones as in micro-pave or in the case where the stones have been wax-set prior to casting. The chemical make-up of this rhodium enables the metal to penetrate below the stone producing a compact white deposit. This deposit grants the stone a more luminous base which allows the stone to appear more brilliant and visually appealing. (Read less)
RH2M
White rhodium for bath plating 2 g/l ready-to-use
RH2M is a ready-to-use white rhodium for bath plating. The properties of the RH2M rhodium deposit grant a higher degree of whiteness due to a more com ... (read more)
RH2M is a ready-to-use white rhodium for bath plating. The properties of the RH2M rhodium deposit grant a higher degree of whiteness due to a more compact deposition when compared to standard rhodium solutions following the same process cycle. These results have been obtained by improving working conditions: the applicable voltage range has been widened, making the process parameters more flexible to guarantee optimal results. This new anti-burn technology eliminates the most common errors such as: surface calculation inaccuracy, prolonged immersion times, bath overheating and excessive voltage. It is also possible to obtain thicknesses of 1.0 Micron.
As a consequence of the more brilliant deposition, the average consumption of the rhodium suspended in the electrolyte inclines to be around 10% higher under the same working conditions.
(Read less)RH2PB
Black rhodium for pen plating 2 g/100 ml ready-to-use
RH2PB is a black rhodium for pen plating. It is great selection for doing two-tone designs or detail work such as black inlay, but most commonly used ... (read more)
RH2PB is a black rhodium for pen plating. It is great selection for doing two-tone designs or detail work such as black inlay, but most commonly used as a product to highlight black diamonds by applying to the prong area. The formulation is 100% arsenic free both in the metal deposited and in the chemical itself. (Read less)
RH2PM
White rhodium for pen plating 2 g/100 ml ready-to-use - IMPROVED FORMULATION
IMPROVED FORMULATION - RH2PM is a white rhodium designed for pen plating application. It is the fastest depositing pen rhodium in our portfolio making ... (read more)
IMPROVED FORMULATION - RH2PM is a white rhodium designed for pen plating application. It is the fastest depositing pen rhodium in our portfolio making this solution the best formulation for productions where speed is most important. High throwing power makes it an ideal choice for textured surfaces. The complex chemical balance allows for low tip consumption and no fume development when applying. (Read less)
RH2PS
Super white rhodium for pen plating 2 g/100 ml ready-to-use
RH2PS is an exceptionally white rhodium for pen plating. It has been formulated as a top class chemical with the perfect balance of speed and whitene ... (read more)
RH2PS is an exceptionally white rhodium for pen plating. It has been formulated as a top class chemical with the perfect balance of speed and whiteness. It is the perfect choice to decorate items with many diamonds or cubic zirconia’s as the high degree of whiteness and luminosity in the deposit help the stones to generate a high reflective index making them look more visually appealing. (Read less)
RH2RBX
RH2W
White rhodium for bath plating 2 g/l ready-to-use
RH2W is a ready-to-use white rhodium for bath plating. This white rhodium plating electrolyte is commonly used in larger rhodium installations due to ... (read more)
RH2W is a ready-to-use white rhodium for bath plating. This white rhodium plating electrolyte is commonly used in larger rhodium installations due to the minimal components needed for maintenance. The deposition speed is slower than other formulations allowing for accurate consumption control. This balanced deposit also makes it an ideal choice for large or flat surfaces permitting complete surface coverage in low current density areas. RH2W is efficient at room temperature allowing minimal water evaporation. (Read less)
RH2XL
White rhodium for bath plating 2 g/l ready-to-use
RH2XL is a ready-to-use white rhodium for bath plating. The excessive throwing power of this rhodium plating electrolyte allows for easy distribution ... (read more)
RH2XL is a ready-to-use white rhodium for bath plating. The excessive throwing power of this rhodium plating electrolyte allows for easy distribution in difficult to reach places making it ideal for substrates with a lot of detail. This formulation has been developed specifically for items with a lot of stones as in micro-pave or in the case where the stones have been wax-set prior to casting. The chemical make-up of this rhodium enables the metal to penetrate below the stone producing a compact white deposit. This deposit grants the stone a more luminous base which allows the stone to appear more brilliant and visually appealing. (Read less)
RH2Z
Ready to use rhodium industrial plating bath 2g/l white
RH2Z is a rhodium plating bath that has been developed for industrial purposes, to run in very big volume tanks. The properties of the deposit and its ... (read more)
RH2Z is a rhodium plating bath that has been developed for industrial purposes, to run in very big volume tanks. The properties of the deposit and its degree of whiteness make this electrolytic solution a benchmark product for all the industrial platers looking for unparalleled finishing excellence for their items. Moreover the simple formula of this system makes it very easy in replenishing operations for both the rhodium and the brilliant compounds consumed during the normal plating operations run with the same rhodium solution. (Read less)
RH4FBLUE
Blue rhodium for bath plating 4 g/250 ml make-up
RH4BLUE is the concentrated version of our blue rhodium for bath plating. To prepare the ready-to-use product, simply pour the 250 ml bottle into 750 ... (read more)
RH4BLUE is the concentrated version of our blue rhodium for bath plating. To prepare the ready-to-use product, simply pour the 250 ml bottle into 750 ml of pure deionized water. This blue rhodium electrolyte has been designed specifically for decorative electroplating applications by granting alternative color options for finishes. Blue rhodium is a perfect option to add color to metallic substrates such as jewelry while maintaining the precious aspect of the design. Most commonly used for plating the prong area to enhance the color of blue stones, this room temperature procedure makes it ideal for two-tone designs. Given that it is a bath plating process, the deposition is more stable in terms of color and grants wear resistance. (Read less)
RH5RM
Rhodium M replenisher - 5 g/100 ml
RH5RM is the all inclusive replenisher for the M type white rhodium plating electrolyte. Simply add 20 ml of replenisher to restore 1 gram of rhodium ... (read more)
RH5RM is the all inclusive replenisher for the M type white rhodium plating electrolyte. Simply add 20 ml of replenisher to restore 1 gram of rhodium and all of the necessary brighteners required to maintain the rhodium electrolyte. To maintain the stability of the deposition speed, it is recommended to replenish when the rhodium reaches 80% of its initial concentration. (Read less)
RH5RW
Rhodium W replenisher - 5 g/100 ml
RH5RW is the all inclusive replenisher for the W type white rhodium plating electrolyte. Simply add 20 ml of replenisher to restore 1 gram of rhodium ... (read more)
RH5RW is the all inclusive replenisher for the W type white rhodium plating electrolyte. Simply add 20 ml of replenisher to restore 1 gram of rhodium and all of the necessary brighteners required to maintain the rhodium electrolyte. To maintain the stability of the deposition speed, it is recommended to replenish when the rhodium reaches 80% of its initial concentration. (Read less)
RH5RXL
Rhodium XL replenisher - 5 g/100 ml
RH5RXL is the primary replenisher for the XL type white rhodium plating solution. Simply add 20 ml of replenisher to restore 1 gram of rhodium and all ... (read more)
RH5RXL is the primary replenisher for the XL type white rhodium plating solution. Simply add 20 ml of replenisher to restore 1 gram of rhodium and all of the necessary brighteners required to maintain the rhodium electrolyte. To maintain the stability of the deposition speed, it is recommended to replenish when the rhodium reaches 80% of its initial concentration. (Read less)
RU5BLACK
Black ruthenium for bath plating 5 g/l ready-to-use
RU5BLACK is a ruthenium plating electrolyte which deposits an abrasion resistant layer of ruthenium metal in a clean anthracite black color. The black ... (read more)
RU5BLACK is a ruthenium plating electrolyte which deposits an abrasion resistant layer of ruthenium metal in a clean anthracite black color. The black color produced is developed with extremely stable organic additives making this electrolyte easy to use and maintain. This acidic based compound is primarily used in decorative plating applications for a diverse dark color option in the case where corrosion resistance is also a requirement. The plating deposit is durable and can reach a maximum thickness of 0.2 micron. Due to the fact ruthenium has a lower conductivity than other precious metals, the electrolyte requires a greater metal concentration to function optimally. (Read less)
RU5BLACK-X
Extra black ruthenium for bath plating 5g/l (ready-to-use)
- Deep black colorArsenic free
- REACH Compliant
- 5 grams per liter
- Economical precious metal deposit
RU5BLACK-X is an extra black ruthenium plating electrolyte which deposits a glossy layer of ruthenium metal in a jet black color. The solution is sold ... (read more)
RU5BLACK-X is an extra black ruthenium plating electrolyte which deposits a glossy layer of ruthenium metal in a jet black color. The solution is sold as a kit ,with the ruthenium solution as part A and the blackening agent in powder form separately as part B. The black color produced is developed with additions of ,heavy organic additives that oxidize the ruthenium metal as it is deposited. ,Precise mixing instructions must be followed to obtain optimum results. This acidic based compound is primarily used in decorative plating applications for a deep black color option in the case where corrosion resistance is also a requirement. Due to the fact ruthenium has a lower conductivity than other precious metals, the electrolyte requires a greater metal concentration to function optimally. The formulation is 100% arsenic free both in the metal deposited and in the chemical itself and falls within REACH compliance. (Read less)
RU5DG-C
Dark gray ruthenium for bath plating 5 g/ 200 ml make-up
RU5DG-C is a ruthenium plating electrolyte in concentrated form. Simply add the 200 ml bottle to 800 ml of pure deionized water to prepare the ready ... (read more)
RU5DG-C is a ruthenium plating electrolyte in concentrated form. Simply add the 200 ml bottle to 800 ml of pure deionized water to prepare the ready to use solution. The electrolyte deposits an abrasion resistant layer of ruthenium metal in a dark gray color. The dark gray color produced is developed with extremely stable organic additives making this electrolyte easy to use and maintain. This acidic based compound is primarily used in decorative plating applications for a diverse dark color option in the case where corrosion resistance is also a requirement. The plating deposit is durable and can reach a maximum thickness of 0.2 micron. Due to the fact ruthenium has a lower conductivity than other precious metals, the electrolyte requires a greater metal concentration to function optimally. (Read less)
RU5GRAY
Gray ruthenium for bath plating 5 g/l ready-to-use
RU5GRAY is a ruthenium plating electrolyte which deposits an abrasion resistant layer of ruthenium metal in a titanium gray color. The gray color prod ... (read more)
RU5GRAY is a ruthenium plating electrolyte which deposits an abrasion resistant layer of ruthenium metal in a titanium gray color. The gray color produced is that of pure ruthenium as the solution does not contain any additional organic additives for darkening purposes. This lack of additional chemical makes RU5GRAY the fastest depositing ruthenium, functional at lower than optimal temperatures. This acidic based compound is primarily used in decorative plating applications for a diverse color option in the case where corrosion resistance is also a requirement. The plating deposit is durable and can reach a maximum thickness of 0.2 micron. Due to the fact ruthenium has a lower conductivity than other precious metals, the electrolyte requires a greater metal concentration to function optimally. (Read less)
SGR1
Electrolytic degreasing solution for the plating process 5L (ready-to-use)
The degreasing bath which is also commonly referred to as electro-cleaner is used to activate the surface of metallic substrates prior to electroplati ... (read more)
The degreasing bath which is also commonly referred to as electro-cleaner is used to activate the surface of metallic substrates prior to electroplating. It is an alkaline based chemical which helps with both surface cleaning and preparation. This process can be executed using a wide temperature range from 25-50°C, while dispersing approximately 6 volts of electricity through the liquid using a stainless steel anode as the positive pole. This produces several hydrogen gas bubbles which assist in the activation process. (Read less)
STEP1
Deoxidizing liquid without cyanide 1 L (ready-to-use)
STEP1 is an ambient temperature oxide removal liquid which is 100% cyanide free. Some of the most common problems in plating are defects caused by sur ... (read more)
STEP1 is an ambient temperature oxide removal liquid which is 100% cyanide free. Some of the most common problems in plating are defects caused by surface oxidation. These troubles are commonly experienced when plating substrates that include high contents of copper such as brass, silver, or low karat gold.
Oxidization on the surface of the substrate can cause:
1) Dullness or lack of Shine
2) Cloudy Surface
3) Poor Adhesion
(Read less)Family: T-FENDER
T-PRO
Anti-tarnish chemical passivation for oxidization resistance (ready-to-use)
T-PRO, part of the T-FENDER line, is a chemical passivation agent developed for metallic substrates which naturally have poor corrosion resistance, ... (read more)
T-PRO, part of the T-FENDER line, is a chemical passivation agent developed for metallic substrates which naturally have poor corrosion resistance, like silver, brass, bronze, low karat gold, and some electroplated layers.
By applying T-PRO to these metals, resistance to oxidation (tarnish) is dramatically elevated by providing an invisible layer which seals the substrate from external elements.
Laboratory tests have proven that chemical passivation protects from corrosion originating from hydrogen sulfide, UV radiation, synthetic sweat, and humidity. T-PRO is easy to use, not requiring any electrical current and works simply by heating up the product and dipping in your object.
By adding T-SALT, Legor Group conductive salt solutions, T-PRO can also be used by galvanic process to increase its protection level.
(Read less)T-PRO20
Anti-tarnish chemical passivation for oxidization resistance (1:20 concentrate)
T-PRO20 is the concentrated version of T-PRO anti-tarnish chemical passivation. It is sold in a 1 liter package that yields 20 liters of ready-to-use ... (read more)
T-PRO20 is the concentrated version of T-PRO anti-tarnish chemical passivation. It is sold in a 1 liter package that yields 20 liters of ready-to-use solution when mixed with deionized water.
T-PRO, part of the T-FENDER line, is a chemical passivation agent developed for metallic substrates which naturally have poor corrosion resistance, like silver, brass, bronze, low karat gold, and some electroplated layers.
By applying T-PRO to these metals, resistance to oxidation (tarnish) is dramatically elevated by providing an invisible layer which seals the substrate from external elements.
Laboratory tests have proven that chemical passivation protects from corrosion originating from hydrogen sulfide, UV radiation, synthetic sweat, and humidity. T-PRO is easy to use, not requiring any electrical current and works simply by heating up the product and dipping in your object.
By adding T-SALT, Legor Group conductive salt solutions, T-PRO can also be used by galvanic process to increase its protection level.
(Read less)T-PRO50
Anti-tarnish chemical passivation for oxidization resistance (ready-to-use)
T-PRO50 is the concentrated version of T-PRO anti-tarnish chemical passivation. It is sold in a 1 liter package that yields 50 liters of ready-to-use ... (read more)
T-PRO50 is the concentrated version of T-PRO anti-tarnish chemical passivation. It is sold in a 1 liter package that yields 50 liters of ready-to-use solution when mixed with deionized water.
T-PRO, part of the T-FENDER line, is a chemical passivation agent developed for metallic substrates which naturally have poor corrosion resistance, like silver, brass, bronze, low karat gold, and some electroplated layers.
By applying T-PRO to these metals, resistance to oxidation (tarnish) is dramatically elevated by providing an invisible layer which seals the substrate from external elements.
Laboratory tests have proven that chemical passivation protects from corrosion originating from hydrogen sulfide, UV radiation, synthetic sweat, and humidity. T-PRO is easy to use, not requiring any electrical current and works simply by heating up the product and dipping in your object.
By adding T-SALT, Legor Group conductive salt solutions, T-PRO can also be used by galvanic process to increase its protection level.
(Read less)T-SALT
Conducting salts for passivating solutions 100 g
T-SALT are the conducting salts for passivating solutions of T-FENDER line. The addition of these salts in the ready-to-use passivating solutions allo ... (read more)
T-SALT are the conducting salts for passivating solutions of T-FENDER line. The addition of these salts in the ready-to-use passivating solutions allows the product to be used electrolytically, improving the quality of the deposited layer and reducing the application time. (Read less)
Désirez-vous plus d'un produit ?
Consultez toute la gamme de produits dans notre catalogue en PDF
© 2022 LEGOR GROUP S.p.A. - Società Benefit - CF e P.Iva IT 00844230284 - Reg. Imprese Vi - Nr. REA 147954 - Capitale sociale i.v. 3.000.000€
Sede Legale: Via del Lavoro, 1
36050 Bressanvido (VI)
Italy